REALTIME FLOWS    U. Kern: n/a cfs    L. Kern: 1341 cfs    E.W: 312 cfs    U. Owens: 108 cfs    L. Owens: 496 cfs   09/02/19 1:15 PM PST

Czech nymphing

For topics that don't seem to have a home elsewhere.

Czech nymphing

Postby fish-on-bro » March 12th, 2009, 10:10 am

Guys, stumbled on to this Czech nymphing thang, looks pretty interesting. Any of you ever try it, or know af any good reading. I would like to dive into this subject a little.

Fish-on-bro, out....
User avatar
fish-on-bro
 
Posts: 469
Joined: October 31st, 2008, 7:13 pm

Re: Czech nymphing

Postby RiverRat » March 12th, 2009, 10:30 am

Ever hear of the legend Zee aka Czechflyfisherman! I fished with him once and he had over ten double hookups in one morning..so yes it works :!: :!: :!: :!: :!:

shane
RiverRat
 
Posts: 749
Joined: August 10th, 2008, 9:57 am
Location: Bakersfield

Re: Czech nymphing

Postby darrin terry » March 12th, 2009, 10:48 am

Oh yes. It works. I fished with Zee too. I am by no means proficient with the method, but it works. Like anything else, it takes practice. It's not a catch-all nymphing method though. You need to use it in the right circumstances with the right rig - usually a two or three fly rig, no indicator.

You could say, fish the lower Owens. Walk down river from your access point and fish your way back up. You would find water that indicator nymphing was key, then a section where high stick nymphing was best, then maybe some perfect water for Czech/Polish (short line) nymphing.

I'd suggest you give it a go, but expect to change up your method as fish.

Oh yeah, get used to tying lots of knots. ;)

I almost always do this with a three fly rig lately. Have fun. :D
How do you tie the fly to your hooks without killing them with the thread? I keep cutting them in half.
User avatar
darrin terry
 
Posts: 3369
Joined: July 26th, 2008, 8:47 am
Location: Locale: NoCal

Re: Czech nymphing

Postby fish-on-bro » March 12th, 2009, 10:51 am

Yup, fished with Zee. Ya know, fish will eat his spit. :lol: When I fished with Zee, we pretty much were streamer fishing, so didn't get schooled on this one.

Fish-on-bro, out....
User avatar
fish-on-bro
 
Posts: 469
Joined: October 31st, 2008, 7:13 pm

Re: Czech nymphing

Postby darrin terry » March 12th, 2009, 10:57 am

Yeah, I know about fish eating his spit. I was there when it happened. :D :lol:
How do you tie the fly to your hooks without killing them with the thread? I keep cutting them in half.
User avatar
darrin terry
 
Posts: 3369
Joined: July 26th, 2008, 8:47 am
Location: Locale: NoCal

Re: Czech nymphing

Postby czech flyfisherman » March 12th, 2009, 4:33 pm

Hi guy's.

and thanks for nice words. So what you need to know Fish on bro.?
Image
czech flyfisherman
 
Posts: 159
Joined: September 10th, 2008, 12:23 am
Location: New Zealand

Re: Czech nymphing

Postby Eric » March 12th, 2009, 6:35 pm

Chuck i know nothing about that Czech nymphing thing ;) Try it and you will like it. About the only way I nymph now. Zee was a pretty dam good teacher :!:
Eric
User avatar
Eric
 
Posts: 2430
Joined: August 18th, 2008, 3:01 pm
Location: Mission Hills, Ca

Re: Czech nymphing

Postby Papasequoia » March 12th, 2009, 6:49 pm

I think I'll try czech dry nymphing: a size #14, #16 and #18 blue-winged olive during a hatch, maybe toss on an RS2 'trailer' as well. :lol: J/k, but maybe not. I have often fished two dries, why not three? As long as you are somewhere where drag isn't a big consideration. Hmmmmmm. I think this calls for some research! ;) Jon
Nature always wins.
> miles = < people
Camp in the mountains, not the left lane!
Image
User avatar
Papasequoia
 
Posts: 4655
Joined: July 5th, 2008, 10:14 pm
Location: East Side of the Sierra Nevada

Re: Czech nymphing

Postby czech flyfisherman » March 13th, 2009, 1:16 am

Hi Eric,

thanks and you are a good student :D
Chuck check your PM.

Zee
Image
czech flyfisherman
 
Posts: 159
Joined: September 10th, 2008, 12:23 am
Location: New Zealand

Re: Czech nymphing

Postby fshflys » March 13th, 2009, 8:26 am

I found this site extremely helpful, answers questions I had bout how to tie fly rigs and so on. While I don't quite fish Czech style I have incorporated some of techniques, heavily weighted flies that sink fast instead of just weight on the line.
http://www.flyguysoutfitting.com/droppers.html - also has a link to tie an orvis knot that I have been using instead of double surgeons.
# of fishing days 2014, 12
fshflys
 
Posts: 322
Joined: December 8th, 2008, 10:18 am
Location: San Juan Cap

Re: Czech nymphing

Postby Eric » March 13th, 2009, 9:14 am

czech flyfisherman wrote:Hi Eric,

thanks and you are a good student :D
Chuck check your PM.

Zee

Thanks buddy. No pm yet. I'll be dropping of the items you asked for at Jon's this weekend.
Eric
User avatar
Eric
 
Posts: 2430
Joined: August 18th, 2008, 3:01 pm
Location: Mission Hills, Ca

Re: Czech nymphing

Postby dna » March 13th, 2009, 11:33 am

Papasequoia wrote:I think I'll try czech dry nymphing: a size #14, #16 and #18 blue-winged olive during a hatch, maybe toss on an RS2 'trailer' as well. :lol: J/k, but maybe not. I have often fished two dries, why not three? As long as you are somewhere where drag isn't a big consideration. Hmmmmmm. I think this calls for some research! ;) Jon


Only one fly at a time buddy...hehe Just kidding. Throwing 3 dries is an interesting endeavor and can prove challenging and very rewarding! Give it a whirl...
dna
 
Posts: 217
Joined: July 26th, 2008, 4:49 am
Location: The Big City, CA

Re: Czech nymphing

Postby Rockstar Fisherman » March 13th, 2009, 8:39 pm

It's a lot easier than you think. You can't do it everywhere, but without getting into too much detail, all you really do is stick your rod out and wait to feel the bite as it drifts.
"Live life before you die"
States fished: AZ, CA, NV, OR, WY, MT, IN, WI, ID, UT
Foreign Countries fished: CZ, NZ, SL, PL, CI
User avatar
Rockstar Fisherman
 
Posts: 1857
Joined: September 12th, 2008, 12:24 am
Location: Pocatello, Idaho


Return to General Fly Fishing

Who is online

Users browsing this forum: No registered users and 264 guests