REALTIME FLOWS    U. Kern: n/a cfs    L. Kern: 1341 cfs    E.W: 312 cfs    U. Owens: 108 cfs    L. Owens: 496 cfs   09/02/19 1:15 PM PST

Floatant Testing

For topics that don't seem to have a home elsewhere.

Floatant Testing

Postby midger » May 17th, 2014, 6:59 am

For all you dedicated dry fly fishers I came across this on another site so thought I'd pass it on. The fumed silica many of us buy in bulk and use is about the same as Frog's Fanny for what it's worth. I've used Aquel for years and it is great for keeping yarn indicators floating--not good for CDC winged flies. The Frog's Fanny/FS works great for the cdc though.

http://troutster.com/fly-floatant-test/
"Should you cast your fly into a branch overhead or into a bush behind you, or miss a fish striking, or lose him,or slip into a hole up to your armpits-keep your temper; above all things don't swear, for he that swears will catch no fish."
User avatar
midger
 
Posts: 3356
Joined: August 14th, 2008, 9:47 am
Location: Idaho

Re: Floatant Testing

Postby meb » May 17th, 2014, 4:11 pm

As a dedicated dry fly enthusiast, I enjoyed the site. The floatant that won, Shimazaki, uses a combination of fumed silica and silica gel. The fumed silica repels water and the gel absorbs it to dry your fly out.

MB
meb
 
Posts: 325
Joined: November 7th, 2008, 2:36 pm
Location: OC

Re: Floatant Testing

Postby Jimbo Roberts » May 17th, 2014, 5:24 pm

It funny that I use Loon Aquel, Shimazaki, and Frog B@tt.
I usually start with the dry fly and apply Aquel, then I work some Frog B@tt in with the brush.
After it get water logged or a fish takes it under I use the shake to dry it out. I really like the Frog B@tt brush as once the fly gets wet or slimed that brush works real well at working the floatant back into the fly.

Jimbo
Jimbo Roberts
 
Posts: 1329
Joined: October 19th, 2011, 7:47 pm
Location: San Antonio Texas

Re: Floatant Testing

Postby flyster » May 17th, 2014, 7:01 pm

Shimazake shake, I put that stuff on everything!!!! Big fan of that stuff. I have six or more bottles just in case they stop making it.
" Boy it's going to be really hard not to do this again tomorrow!!"
User avatar
flyster
 
Posts: 848
Joined: February 28th, 2010, 5:26 pm
Location: Pomona,Ca.

Re: Floatant Testing

Postby flybob » May 18th, 2014, 11:44 am

Well for me it has to be this stuff!
Been using Marks special home made recipe for years!
When I run out of it out on the water, I actually start to panic!
So now I carry TWO bottles of it....with the "NO DROP" applicator!

viewtopic.php?f=22&t=9826
"The accomplishment of flyfishing is all about the experience of diversity......and the occasional element of surprise."
(rmg/2012)
Image
User avatar
flybob
 
Posts: 4275
Joined: July 27th, 2008, 10:26 am
Location: S. Orange County

Re: Floatant Testing

Postby John Harper » May 18th, 2014, 12:42 pm

flyster wrote:Shimazake shake, I put that stuff on everything!!!! Big fan of that stuff. I have six or more bottles just in case they stop making it.


You can buy a bag of fumed silica for real cheap. I mix it with some silica granules from little dehydration packets. I did not know granules helped dry the fly, just thought it shook up with the fly and fumed stuff so made better contact. I can send you some if you want, I have a good sized bag, you just need some silica gel packs, I just got a couple from a box of shoes I bought this morning, go figure.

John
John Harper
 
Posts: 1070
Joined: May 1st, 2009, 10:16 am
Location: Carlsbad, CA

Re: Floatant Testing

Postby meb » May 18th, 2014, 2:43 pm

The gel that I come across is in little balls, so I put it in a coffee grinder to reduce it to powder and then mix it with equal portions of fumed silica which I think is pretty much what Shimazake is made of.

MB
meb
 
Posts: 325
Joined: November 7th, 2008, 2:36 pm
Location: OC

Re: Floatant Testing

Postby midger » May 18th, 2014, 2:55 pm

meb wrote:The gel that I come across is in little balls, so I put it in a coffee grinder to reduce it to powder and then mix it with equal portions of fumed silica which I think is pretty much what Shimazake is made of.

MB



Mark,
So is your coffee hard to swallow? ;)
"Should you cast your fly into a branch overhead or into a bush behind you, or miss a fish striking, or lose him,or slip into a hole up to your armpits-keep your temper; above all things don't swear, for he that swears will catch no fish."
User avatar
midger
 
Posts: 3356
Joined: August 14th, 2008, 9:47 am
Location: Idaho

Re: Floatant Testing

Postby meb » May 19th, 2014, 5:47 pm

I just grind a bunch of coffee afterwards, hoping it will dilute whatever silica is left behind, and I make sure my wife has the first cup of coffee, so far so good.

Mark
meb
 
Posts: 325
Joined: November 7th, 2008, 2:36 pm
Location: OC

Re: Floatant Testing

Postby lucfish » May 19th, 2014, 6:31 pm

meb wrote:I just ground a bunch of coffee afterwards, hoping it will dilute whatever silica is left behind, and I make sure my wife has the first cup of coffee, so far so good.

Mark


:funnyup: :NICETHREAD: :LOLO: :LOLO: :LOLO:
User avatar
lucfish
 
Posts: 3671
Joined: April 15th, 2009, 3:28 pm
Location: canyon lake, calif

Re: Floatant Testing

Postby midger » May 24th, 2014, 7:22 am

meb wrote:I just grind a bunch of coffee afterwards, hoping it will dilute whatever silica is left behind, and I make sure my wife has the first cup of coffee, so far so good.

Mark



I tried this and the grinder works great. I even gave my wife the first cup of coffee this morning. I should be able to take the bandages off my head next week. ;)
"Should you cast your fly into a branch overhead or into a bush behind you, or miss a fish striking, or lose him,or slip into a hole up to your armpits-keep your temper; above all things don't swear, for he that swears will catch no fish."
User avatar
midger
 
Posts: 3356
Joined: August 14th, 2008, 9:47 am
Location: Idaho


Return to General Fly Fishing

Who is online

Users browsing this forum: No registered users and 141 guests

cron