Winston Info needed

[stanbery]

Need the measurement from the butt section to the silver Winston sticker.
Somebody on this form has to be a Winston *

Jon

[briansII]

In the past, Winston has been very good about answering my questions. I'd give them a call just to be sure.

Jon, it varies. If this is a 4 piece, 10' my measurements can be off of what the factory uses. Here's what I came up with. Measured from butt cap to center of Winston decal

2 piece, 9' IM6 = 17 1/4"

3 piece 7' 1/2" WT/pre IM6 = 20 3/4" (note this is a old version decal)

4 piece 8'9" BXII = 19 1/4"

5 piece 8'9" LT = 18"

Putting somewhere close to 3/4 of the way up to the ferrule from the butt cap would be close, but not exact.

briansII

[stanbery]

Brian

Thanks for the info

Jon