REALTIME FLOWS    U. Kern: n/a cfs    L. Kern: 1341 cfs    E.W: 312 cfs    U. Owens: 108 cfs    L. Owens: 496 cfs   09/02/19 1:15 PM PST

Reel for my 0wt

For topics that don't seem to have a home elsewhere.

Reel for my 0wt

Postby anacrime » August 25th, 2008, 8:23 pm

Finally decided on a reel for my 0wt. Looked into a bunch of different reels and decided to go with this little guy.

Image

J. Austin Forbes Avon 2"

There's a guy selling them on eBay for $90

I do have one question that hopefully someone here can help me with. I can't figure out how to switch to left hand retrieve. Help?

Image
"Whenever I see a photograph of some sportsman grinning over his kill, I am always impressed by the striking moral and aesthetic superiority of the dead animal to the live one."
-Edward Abbey
User avatar
anacrime
 
Posts: 1385
Joined: April 20th, 2008, 5:16 pm
Location: Denver, CO

Re: Reel for my 0wt

Postby darrin terry » August 25th, 2008, 10:18 pm

Shane, I do not know this reel, but it looks, mechanically, a lot like the Pflueger 1492 which is not reversible. Of course you could flip it around and fish it reversed if there is an opening for the line on both sides. You just would not have drag to the fish. My buddy uses his 1492 that way on his 2 wt.

It looks like, if it can be done, the pin the spring wraps around would have to be moved to the other side of the center. But it is likely pressed in, not threaded. That's just a guess though.
How do you tie the fly to your hooks without killing them with the thread? I keep cutting them in half.
User avatar
darrin terry
 
Posts: 3369
Joined: July 26th, 2008, 8:47 am
Location: Locale: NoCal

Re: Reel for my 0wt

Postby anacrime » August 26th, 2008, 12:28 am

Their website says it's left or right hand retrieve
"Whenever I see a photograph of some sportsman grinning over his kill, I am always impressed by the striking moral and aesthetic superiority of the dead animal to the live one."
-Edward Abbey
User avatar
anacrime
 
Posts: 1385
Joined: April 20th, 2008, 5:16 pm
Location: Denver, CO

Re: Reel for my 0wt

Postby STMFlyGuide » August 26th, 2008, 1:12 am

ya, the triangle with the slot in it.. slide it off the post while keeping the loaded spring in place...then flip that piece over and put back on so the slot is on the other side.....the clicking drag will now be switched...hope this helps.. David
Mammoth Lakes Fly Fishing Guide and Fly Shop in Bishop Ca

http://www.sierratroutmagnet.com
User avatar
STMFlyGuide
 
Posts: 322
Joined: June 24th, 2008, 10:05 am
Location: Eastern Sierra CA

Re: Reel for my 0wt

Postby darrin terry » August 26th, 2008, 6:44 am

Cool. Zooming in I can see how that piece fits in place. It still amazes me how many ways people have come up with to reverse the direction on fly reels. :D
How do you tie the fly to your hooks without killing them with the thread? I keep cutting them in half.
User avatar
darrin terry
 
Posts: 3369
Joined: July 26th, 2008, 8:47 am
Location: Locale: NoCal

Re: Reel for my 0wt

Postby dna » August 26th, 2008, 8:45 am

Now I am really jealous. I have been talking about that reel for so long...finally someone got it! Score! The design is like the reversible Martin reels that I am a big fan of.

Correct me if I am wrong: the parts on J Austin Forbes reels are the left overs from J.W. Young reels of England. JAF just bought all the inventory and assembles them here in the US.
dna
 
Posts: 217
Joined: July 26th, 2008, 4:49 am
Location: The Big City, CA

Re: Reel for my 0wt

Postby Benny » August 26th, 2008, 10:40 am

Hey Shane,

if you don't understand maybe this photo will help you out.

Image
Benny
 
Posts: 3328
Joined: July 28th, 2008, 11:11 pm

Re: Reel for my 0wt

Postby anacrime » August 26th, 2008, 10:56 am

Hmm that was the first thing I tried and it didn't seem to work

Maybe a stupid question, do I have to reline it after I switch? It takes in line the same way with either position of the piece

And yea, Antonio, I think you're right. The reel says Made in England on it
"Whenever I see a photograph of some sportsman grinning over his kill, I am always impressed by the striking moral and aesthetic superiority of the dead animal to the live one."
-Edward Abbey
User avatar
anacrime
 
Posts: 1385
Joined: April 20th, 2008, 5:16 pm
Location: Denver, CO

Re: Reel for my 0wt

Postby dna » August 26th, 2008, 12:51 pm

anacrime wrote:Hmm that was the first thing I tried and it didn't seem to work

Maybe a stupid question, do I have to reline it after I switch? It takes in line the same way with either position of the piece

And yea, Antonio, I think you're right. The reel says Made in England on it

Yeah, you have to reline it.
dna
 
Posts: 217
Joined: July 26th, 2008, 4:49 am
Location: The Big City, CA

Re: Reel for my 0wt

Postby anacrime » August 26th, 2008, 1:12 pm

dna wrote:
anacrime wrote:Hmm that was the first thing I tried and it didn't seem to work

Maybe a stupid question, do I have to reline it after I switch? It takes in line the same way with either position of the piece

And yea, Antonio, I think you're right. The reel says Made in England on it

Yeah, you have to reline it.

Dang it! Do you know how long it takes to reel in 20yds backing and 90ft of fly line on a 2" spool?!
"Whenever I see a photograph of some sportsman grinning over his kill, I am always impressed by the striking moral and aesthetic superiority of the dead animal to the live one."
-Edward Abbey
User avatar
anacrime
 
Posts: 1385
Joined: April 20th, 2008, 5:16 pm
Location: Denver, CO

Re: Reel for my 0wt

Postby anacrime » August 26th, 2008, 1:30 pm

Alright, finally got it right. Thanks guys
"Whenever I see a photograph of some sportsman grinning over his kill, I am always impressed by the striking moral and aesthetic superiority of the dead animal to the live one."
-Edward Abbey
User avatar
anacrime
 
Posts: 1385
Joined: April 20th, 2008, 5:16 pm
Location: Denver, CO

Re: Reel for my 0wt

Postby dna » August 26th, 2008, 3:02 pm

No prob...now that it is set up, I can steal it from you :twisted:
dna
 
Posts: 217
Joined: July 26th, 2008, 4:49 am
Location: The Big City, CA

Re: Reel for my 0wt

Postby gabe » August 26th, 2008, 5:32 pm

20yrds of backing, that's freaking hilarious!
what the heck do you need 20yrds of backing on an UL setup.
don't tell me you plan to get spooled by a 12" trout.
get rid of some of that unnecessary backing bro.
User avatar
gabe
 
Posts: 553
Joined: August 4th, 2008, 3:18 pm
Location: SoCal

Re: Reel for my 0wt

Postby midger » August 26th, 2008, 7:41 pm

Gabe,
I have to respectfully disagree about getting rid of the backing. It isn't there because you think you will get spooled. It's there to properly fill the reel to where the flyline comes to within about 1/8 inch of the reel pillars when loaded onto the spool, and it also allows for larger turns of the line on the spool thus increasing the line recovery rate. These larger diameter turns also result in less line twist/memory/coiling. I never load a small reel without backing. If the reel is very small, I'd use a Double Taper line, cut in half, with half set aside for reuse after wearing out the first half. I'd then add 100 yards of backing or whatever would make the remaining flyline load properly.

Just my take.
"Should you cast your fly into a branch overhead or into a bush behind you, or miss a fish striking, or lose him,or slip into a hole up to your armpits-keep your temper; above all things don't swear, for he that swears will catch no fish."
User avatar
midger
 
Posts: 3356
Joined: August 14th, 2008, 9:47 am
Location: Idaho

Re: Reel for my 0wt

Postby flybob » August 26th, 2008, 8:15 pm

Hey Shane, that is one sweet tiny reel!

Just make sure you tie it to a zinger, so if you drop it you won't loose it!
JK!

Time to try it out!
Bob
"The accomplishment of flyfishing is all about the experience of diversity......and the occasional element of surprise."
(rmg/2012)
Image
User avatar
flybob
 
Posts: 4275
Joined: July 27th, 2008, 10:26 am
Location: S. Orange County

Next

Return to General Fly Fishing

Who is online

Users browsing this forum: No registered users and 8 guests